Amana Tool Products
Hyundai 550W Electric Clean and Dirty Water Submersible Water Pump / Sub Pump | HYSP550CD
$ 68.75
- Hyundai Submersible Water Pump The HYSP550CD is an electric submersible water pump from Hyundai, suitable for easily and automatically pumping both clean and dirty water up to 7 metres deep. Ideal as a hot tub pump, fish tank pump, swimming pool pump or to clear ponds, puddles or bodies of water built up due to rain, this sub pump is suitable for a huge range of uses, including draining flooded basements, pits, ditches and foundations. Powered by a 550W Hyundai electric motor, the HYSP550CD has a pumping capacity of up to 10,500 litres per hour, which is 175 litres of fluid per minute! Sub Pump With 7m Head With a maximum submersion depth / maximum head of 7 metres (23 feet), the HYSP550CD has an automatic float switch to start and stop the pump whenever water is over or under a certain level to prevent any damage to the pump. This also means you can leave the pump switched on to drain large bodies of clean and dirty water and it will automatically switch off when the water level is less than 5cm deep and switch back on when the water level is above 50cm deep. This electric sub pump is capable of pumping water up to a temperature of 35°c. This pump can cope with debris such as pebbles, gravel and dirt up to 35mm wide and will not allow any larger particles through, so you can drain both dirty and clean water with confidence. Portable Water Pump This submersible pump’s portable design means it weighs just 4.35kg and includes a carry handle to easily transfer it between jobs. The HYSP550CD’s 6m lay-flat hose and 10m mechanically sealed power cable will also allow you to easily reach the water from your power supply. Get Started Out of the Box Including a convenient 7m lay-flat hose and jubilee clips, you can use this electric submersible pump straight out of the box, instead of having to purchase an outlet hose separately. Please note that It is recommended that an RCD is always used with a submersible water pump, which we recommend whenever electrical products are used near water. 3 Year Warranty For added peace of mind, this water pump is covered by a Hyundai 3 year domestic warranty* / 1 year commercial warranty* (terms apply), including full UK parts and labour backup to maintain your pump for years to come. In The Range This sub pump is the middle model of the 3 pumps in our new electric submersible pump range. To view the smallest 250W submersible pump with 5m hose, click here, or to view the largest 1100W sub pump with 7m hose, click here. At A Glance: 550W motor Pumping capacity of up to 10,500L/hour / 175L/min Lightweight at just 4.35kg Ideal as a swimming pool or hot tub pump or for removing any other excess clean or dirty/trash water Pumps water up to temperatures of 35°C Handles debris, dirt and particles up to 35mm Can be submerged in water up to 7 metres deep Includes 6m lay-flat hose and jubilee clips Automatic float switch starts and stops the pump when water level drops 3 year Hyundai domestic warranty* (terms apply) Key Features 550W submersible electric clean and trash water pump: Capable of pumping water when submerged up to 7m deep Clear flooded areas quickly: Able to pump up to 175L of water per minute Automatic float switch: Stops the pump when water level drops below 5cm Able to handle solids up to 35mm: Ideal as a hot tub pump, swimming pool pump or to clear ponds or flooded areas such as basements or ditches 10m sealed power cable: Easily reach the water from your power supply Easy to handle: Lightweight at just 4.35kg Get started out of the box: Includes 6m lay-flat hose and jubilee clips Peace of mind:3 year Hyundai domestic warranty* (terms apply)
- Brand
- Need this Tool Customized?
Brand
LMT
Need This Tool Customized?
Every machining application is different. If this tool is close to what you need but not an exact fit, General Cutting Tools can help modify it for your specific job, machine, material, or production requirement.
We work with CNC shops, industrial manufacturers, tool rooms, and production facilities to provide tool modifications that improve fit, function, performance, and efficiency. Whether you need a small adjustment or a more specialized cutting tool solution, our team can review your requirements and recommend the best option.
Custom tool modifications can help reduce setup time, improve accuracy, extend tool life, solve clearance issues, and support more consistent production results.
Common Tool Customization Options
Diameter and OD Modifications
We can modify tool diameters to better match your application requirements, including cutting diameter changes, OD modifications, pilot diameter adjustments, step diameters, and shank diameter modifications.
Bore Modifications for Saw Blades
Custom saw blade bore modifications are available for hole diameter changes, pinholes, mounting holes, and keyway cutouts to help match your machine setup and cutting requirements.
Length Adjustments
Tools can be modified for specific reach, clearance, or setup needs. This may include overall length changes, flute length adjustments, reduced neck sections, extended reach designs, or shortened tools for improved rigidity.
Shank Modifications
Shank modifications can help ensure the tool fits properly in your holder, spindle, or machine setup. Common options include shank diameter changes, flats, Weldon flats, reduced shanks, and custom holding requirements.
Radius, Chamfer, and Corner Changes
We can customize corner radius, chamfer angles, edge breaks, and other profile details to meet part print requirements or improve cutting performance.
Step Tool Modifications
For applications that require multiple diameters or operations in a single tool, we can create or modify step tools to help reduce tool changes and improve production efficiency.
Flute and Cutting Edge Adjustments
Depending on the tool and application, flute length, cutting edge geometry, end cutting features, relief angles, and cutting edge shape may be modified to improve chip evacuation, cutting action, and tool performance.
Regrinding and Resharpening
Many cutting tools can be reground or resharpened to restore performance, extend tool life, and reduce replacement costs.
Custom Profiles and Special Forms
For unique part features, we can help provide special forms, custom profiles, custom radii, counterbores, countersinks, keyseat cutters, form tools, and other application-specific tooling solutions.
Material-Specific Tool Adjustments
We can help modify or recommend tooling based on the material being machined, including aluminum, brass, bronze, plastics, stainless steel, hardened steel, cast iron, composites, and other industrial materials.
Have a Drawing, Sample, or Part Print?
Send us your print, sketch, CAD file, photo, tool number, sample, or application details. For the fastest quote, include the material being cut, quantity needed, required dimensions, tolerances, and any machine or holder requirements.
Coating Options
Tool coatings can be selected or added to improve wear resistance, heat resistance, lubricity, and performance in specific materials such as steel, stainless steel, aluminum, cast iron, and high-temperature alloys.
Request a Custom Tool Modification
Need this tool changed for your application? Contact General Cutting Tools today to discuss your custom tooling needs. We can help you find the right solution for your machine, material, and production goals.
Related products
Adjustable Milling System
Hyundai 212cc Professional Petrol Water Trash Pump 3″/76mm Outlet | HYT80
$ 95.90
Adjustable Milling System
Hyundai 389cc 13hp Professional Petrol Water Pump – 4″/100mm Outlet | HY100
$ 91.76
Adjustable Milling System
Hyundai 163cc 5.5hp Professional Petrol Water Pump – 2″/50mm Outlet | HY50
$ 98.66
Adjustable Milling System
$ 90.57
Adjustable Milling System
Hyundai 212cc 6.5hp Professional Petrol Water Pump – 3″/80mm Outlet | HY80
$ 95.93
Adjustable Milling System
Hyundai 1100W Electric Clean and Dirty Water Submersible Water Pump / Sub Pump | HYSP1100CD
$ 91.69
Adjustable Milling System
Hyundai 50mm 2″ Electric Start Diesel Chemical Water Pump | DHYC50LE
$ 97.53
Adjustable Milling System
$ 92.89